Flame - TA

Technical Specifications 

Seat:

The inner seat frame is composed of machined plywood & hard wood, supplied with two cylindrical solid pivots to a chive easily replaceable tip – up seat with counter weight mechanism.

For more comfortable, seat frame supplied with Rubber straps & padded   by cut foam with following features:

• Color gray.
• Density 28-29 Kg/m3.
• Tension force max. 100N.
• Compression force max. 126N
• Elongation max. 200%.

Seat is completely upholstered with Fabric, in high quality, special for Auditorium chairs.

Back Rest:

Back frame is composed of multi layered wood panel (in two directions) ,with trimmings of hard wood, padded with cut foam with the same specs. as in seat.

Backrest is completely upholstered with Fabric, in high quality, suitable for Auditorium chairs.

Pedestal Sides & Arm Rest:

Upper part (Arm rest) made of machined wood, padded with cut foam & completely  upholstered with fabric.

Arm is arranged for mounting , Translation or Auditing device.  Lower part (Pedestal sides) made of powder coated formed metal sheet 2mm thick, supplied with fixing piece fixed to the ground by using roll-plugs & screws.

Writing pad:

Made of wood, laminated by the HPL on both sides & disappearing inside the Arm rest.

Fabric:

Imported from the UK with following features Composition:

• 100% Polyolefin.
• Weight :- 230 g/m2 + 5%(320g/lin.m.+5%).
• Width :- 140cm + 2% usable.
• Abrasion :- Grade A tested lin accordance with EN 14465 :2003
• Flammability :- BS EN 1021- 1 :2006 (Cigarette)
• Light fastness : 6 (Iso 105-B02:1999).
• Fastness to rubbing :- Wet:4 Dry: 4 (Iso 105- x12:2002).